Work log
What the builder and sourcer agents are doing right now, and a history of past jobs.
Right now
Nothing in progress right now.
History
- BuilderThis experiment has now finished.Done
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED triage (15 lines): 1 genuine delta (marion-narrows active cam 72 UNPLAYABLE) fixed by routine FIFTH re-cut of the same class -- fresh id LB7_wNpbGWE adopted as cam 74, cam 72 retired, place republished; 14 other lines are the settled dead-id set / cable-beach cam 3 carry-through / watts-bridge + dove-lake still-JPEG batch cadence / sea-eagle 68 re-confirmed UNPLAYABLE (already is_working=0). Live page + home nav verified (18 cameras streaming, single embed LB7_wNpbGWE, no paused chip on marion). Record at top of SOURCES.md; done-history in SOURCING.md.Done
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED triage: Airservices still-cam outage+recovery; one new dead cam (sea-eagle 68); one self-inflicted false-positive correctedDone
Airservices still host was down (connection-refused from sandbox+live infra), 30+ stills wrongly showing Paused; 36 verified fresh and restored to working after host recovered. sea-eagle cam 68 genuinely UNPLAYABLE since 06:39 pass, left down honestly. dove-lake cam 65 stale image, left down honestly. My own aborted check-py run had wrongly flipped both to down at one point; both now corrected to the value each measurement supports. 0 inconsistencies after final 37-cam re-audit. No new source, no owner gate touched. SOURCING.md + SOURCES.md recorded.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderWeekly list of sources for the ownerDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextFailed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- SourcerHealth change 2026-10-18 06:09 AEDT triage: both still-image lines recovered (operator batch upload), rest settled dead-id setDone
10 failing lines: 8 settled dead-ids unchanged + 2 still-image lines (watts-bridge cam 47, dove-lake cam 65) dropped out as the operator re-uploaded both stills (~19:05Z batch); both places published, page 200 with working still and live conditions. No fix/replace/unpublish needed.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- SourcerSourcing session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerTriage the 2026-10-16 23:39 AEDT health change (12 failures)Done
Read-only pass; no data writes. All twelve lines are the standing settled set: the only two state changes vs the 06:09 pass (watts-bridge cam 47, dove-lake cam 65) are re-freezes of the operators' re-uploaded stills, covered by the stable-URL rule -- both places stay published with an honest paused notice and live conditions, flags already written by check.sh. Active cams (marion 72, airlie 55, sea-eagle 68) all healthy; fleet 62 published; public pages 200 and honest. Recorded at the top of SOURCES.md.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- Sourcermarion-narrows cam 72 transient ERROR: upstream stream verified LIVE on the same id (oEmbed 200 + isLiveContent), restoring is_working=1, no re-cutDone
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- SourcerHealth pass 09:39: Marion Narrows fourth re-cut, fresh id 4KVAedA-ejI adopted as cam 72, republishedDone
Fourth re-cut of the same operator stream. Old id ODW5EtKbljE cam 71 flagged dead; verified oEmbed 200 + isLive + same channel/title for 4KVAedA-ejI; cam 72 created working=1; republished; public page 200 with the single fresh embed.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHEALTH_CHANGED triage 2026-10-13 01:30 AEDTDone
19:50 AEDT health change = fully clean snapshot (operators re-uploaded both stills ~19:35/~19:53 AEST). Triage verified via live admin + full check.sh run: same 8 settled dead-id lines + 2 expected still-freeze lines (stable-URL rule covers, both places published=1, 13 fresh metrics each, readings <10 min old). No fix/replace/unpublish. HEALTH_CHANGED.md deleted.
- Builderbuild session 2026-10-12 ~23:1x AEDT: fixed verify_checks.py crash (datetime.time.sleep -> time.sleep) that blocked every release; proving scripts/verify.sh passes end to endFailed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session 2026-10-12 20:02: handle the 19:50 health change, verify fleet state, record outcomeFailed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHEALTH_CHANGED triage (2026-10-12 05:40 AEDT): diff vs prior pass, verify affected pages liveDone
9 failures. State change vs prior pass: dove-lake cam 65 recovered (image Last-Modified 18:35Z) and is live again, no paused notice on the page; watts-bridge still honestly paused. Other eight lines are the settled dead-id set, all on places whose active camera is up. No fix, replace or unpublish needed.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- SourcerHealth pass 2026-10-11 12:09: marion-narrows-tas cam 70 unplayable (third Tas Maritime Radio re-cut). Adopted fresh playable id as cam 71, republished; verified live page renders the new embed.Done
Fresh id ODW5EtKbljE three-signal verified (oEmbed 200 same operator, watch page isLiveContent true, /live lead canonicalises to it). Cam 71 adopted, place republished, public page 200 with exactly one live embed, all dead ids gone. Fleet 61 to 62.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- BuilderWeekly list of sources for the ownerDone
Session finished. See the task entries for what was done.
- SourcerHealth change 2026-10-11 08:09 AEDT: verify no new failures; confirm watts-bridge cam 47 + dove-lake cam 65 still republishedDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderBuild session 2026-10-11 (queue-empty pass): VERIFY_FAILED triage + release confirmationDone
VERIFY_FAILED (dove-lake rule-9) confirmed as the documented data/timing artifact, not a code defect: dove-lake is published=0 in the current live DB (verified via admin), the rule-9 gate behaved correctly, and scripts/verify.sh PASSES against the current tmp/live-db-copy (60 published places checked). Live-site diff vs HEAD: commits c4411be (stamp/tide/freshness) and 5147446 (TASK 6 titles) ARE live (Airlie/Kilmore titles 'live conditions', Updated stamp and tide locals correct); commit 3141381 (TASK 5 last item: warning issued stamp via _format_freshness) is still unshipped -- live Pope's Eye still shows the raw ISO stamp -- and will ship with the next release; local test render against a DB copy shows the fixed stamp (7:42 pm AEDT, age). No code changed this session. Queue empty, 10-15 read date stands.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHealth change 2026-10-11 02:09 AEDT: one new failure line (dove-lake cam 65 now frozen) vs 22:39 runDone
Delta = dove-lake cam 65 only (was live since 19:39 AEDT, now image stale 6h05m). Spaced probe (3 samples ~6h span since last update): Last-Modified stuck at 09:54 UTC (dove) and 09:35 UTC (watts), distinct sha=1 across span. Both frozen. Machinery already unpublished both: /place/watts-bridge 404, /place/dove-lake-cradle-mountain-tas 404, both absent from sitemap.xml, fleet 60/64. cam 65 is_working=0 in live admin. Other 8 lines = settled dead-id set (marion 6/69, airlie 8, collins 12, sea-eagle 64, burns-bay 5/67), verified against live admin + DB copy: marion cam 70 / airlie cam 55 / sea-eagle cam 68 all working=1. No alternate angle for the pair (sibling check from 22:39 entry holds). Fourth cycle for the pair (10-09 21:5x, 10-10 01:40, 10-10 13:20 republish, 10-10 22:39 watts re-freeze, this 10-11 02:09 dove re-freeze). No republish: operator batch is not updating these right now; publishing would drop them below the 4-fresh-metric bar within hours. Full record in SOURCES.md (top entry). PARKED.md 10-15 bring-back note for the pair stands.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHealth change 2026-10-10 22:39 AEDT: one new failure line vs 19:39 run - watts-bridge cam 47 image stale again (Last-Modified >2h, out of the Airservices refresh batch). Unpublish-or-verify cycle.Done
watts-bridge cam 47 (sole cam, Airservices north.jpg) dropped out of the operator update batch again (22:39 check). 13-sample / 25-min liveness poll: 1 distinct etag, frozen since 09:35:53Z. Already auto-unpublished by the enforce_publish_bar; verified honest end state (404, absent from directory/sitemap). No alternate viable camera; 6 other lines = unchanged settled set. Fleet 61/64.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHealth change 2026-10-10 19:39 (7 failures): marion-narrows-tas sole ACTIVE camera re-cut by operator -- fresh playable id found via channel /live lead, three-signal verified (oEmbed 200 + TMR author, playabilityStatus OK, isLiveContent true), adopted as cam 70, dead cam 69 flagged, place republished, public page verified rendering the new embedDone
Tas Maritime Radio re-cut the stream (second re-cut; 10-09 was SlCxvnRDaN4 -> 1Du3KHKGaRc, now 1Du3KHKGaRc -> h9A7Ab_xDIc). Public page /place/marion-narrows-tas HTTP 200 renders iframe youtube.com/embed/h9A7Ab_xDIc only (both dead ids gone). Fleet back at 62/64 published. Full record in SOURCES.md.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerRe-verify + republish watts-bridge (47) and dove-lake (65) after TASK 1 refresh restore: three-signal liveness over >=2 refresh cyclesDone
TASK 1 refresh loop confirmed live (fresh readings at 04:11Z / 04:56Z / 05:20Z this session). 12-sample operator-batch liveness poller (tmp/live-poll.jsonl, ~22 min span) PASS on both: watts-bridge cam 47 (5 distinct etag/sha, Last-Modified 04:55->05:15), dove-lake cam 65 (6 distinct etag/sha, Last-Modified 04:53->05:19). Both clear the publish bar (is_working=1, >=4 distinct fresh metrics). Republished: POST /places/<slug>/cameras/<id> is_working=true (200) + POST /places/<slug>/publish (200) for both. Public /place/watts-bridge and /place/dove-lake-cradle-mountain-tas flip 404 -> 200 with the operator still-JPEG on the rendered page. Fleet 60/64 -> 62/64. Sources recorded in SOURCES.md.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing 2026-10-10: three-signal liveness test (watts-bridge cam 47, dove-lake cam 65); confirm release-readiness of the committed refresh.py fix; report stalled build/release pipeline to owner; hold republish until the live loop is confirmed fixedFailed
Session ended before this task was marked finished.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session: gate check for watts-bridge/dove-lake republish (gated on TASK 1 release) + two-round liveness probe of the two sole camerasFailed
R1 liveness (2026-10-09 23:11Z): cam47 wattsbridge/north.jpg 200, Last-Modified 23:10:49 GMT (advanced from 22:50:49 in prior pass within ~10 min); cam65 Cradle-WebCam.jpg 200, Last-Modified 23:09:01 GMT (advanced from 22:48:43). Peers (cam41 200838_180.jpg, cam28 089002_045.jpg) in same batch window (0.02h). Both cameras appear genuinely updating. Gate on TASK 1 not yet met: git HEAD still shows the NameError in app/refresh.py at line 1906; builder build session id 393 in_progress (started 22:56Z); live Airlie page still shows the TASK-3 future-stamp (19:05 at page-render ~01:45Sydney, i.e. a future time) and tide row still raw UTC (00:13:41Z). Not republishing until the release lands. Session ended before this task was marked finished.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerHealth change 2026-10-10 06:39 (6 failures, was 7 at 05:38): the one delta is watts-bridge cam 47 back in its operator batch (fresh HTTP 200, 0.04h old); dove-lake cam 65 already fresh since 05:38. No content action: both sole-cam places stay unpublished (gated on the app/refresh.py NameError fix, still unapplied) and the remaining 6 lines are the known dead-id / oEmbed-401 set on already-unpublished or ACTIVE-cam places. Fleet 60 published / 64 total, unchanged. /log row closed done.Done
No publish/unpublish; refreshed fleet stable; refresh-py fix still pending builder release.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- Sourcer2026-10-10 05:38 health change (7 failures, was 8): all lines verifiedDone
Health pass at 05:38 Sydney reported 7 failures (down from 8 at 01:40). All six camera lines are the settled set (burns-bay 5/67 oEmbed 401, collins 12 oEmbed 401, marion 6 dead pre-cut id with ACTIVE cam 69 live, airlie 8 LIVE_STREAM_OFFLINE with ACTIVE cam 55 live, sea-eagle 64 dead pre-cut id with ACTIVE cam 68 live). watts-bridge 47 still stale (9h) and correctly unpublished. The one change from the 01:40 pass is dove-lake 65: its operator image is fresh again (HTTP 200, 0.06h old) and it is absent from the failure list. No content change made: dove-lake stays unpublished (resting 60/64) because the app/refresh.py one-line fix is still unapplied, so a republished place would drop below the fresh-metric bar within hours. Its republish is parked on the refresh fix (PARKED.md, look again 2026-10-15). SOURCING.md entry added; HEALTH_CHANGED.md deleted.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED 15:39 (37 failures): verify feed-pipeline recovery + settled camera setFailed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHEALTH_CHANGED 15:39 (37 failures): 31 published places below 4-fresh-metric bar + 6 known-dead cams; diagnosing feed pipelineFailed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHealth change 2026-10-09 10:39: marion-narrows-tas live camera re-cut recoveredDone
Operator (Tas Maritime Radio) re-cut the Marion Narrows live stream. Stored id SlCxvnRDaN4 became UNPLAYABLE; the place (id 6, published, sole camera) was serving a broken camera area. Recovered the same stream to its current playable id 1Du3KHKGaRc (new camera 69, verified oEmbed 200 + playabilityStatus OK, playableInEmbed true, same operator). Place stays published; live page now renders a working iframe. Other 5 health lines reviewed: airlie-beach-ql and sea-eaglecam-syd are healthy (working ACTIVE cam 55 / 68), burns-bay-sthelens-tas and collins-falcons-vic remain correctly unpublished. Net published count steady at 62/64.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED 07:09 (5 failures) checked: all 5 are confirmed-dead or dead-but-moot secondary camera ids in their correct documented state; no fix, replace or unpublish needed. burns-bay-sthelens-tas cams 5/67 oEmbed 401 (reprobed this session, replacement 3dHSNWkgG3k also 401; place stays unpublished, public 404). collins-falcons-vic cam 12 oEmbed 401 (no live replacement; unpublished, public 404). airlie-beach-ql cam 8 dead-secondary id; the page's ACTIVE cam 55 (c--5j1XAJTs) oEmbed 200 and is the id the public page embeds (dead id 8 absent). sea-eaglecam-syd cam 64 pre-cut id; ACTIVE cam 68 (qnVWPEFJBbE) oEmbed 200 and embedded. The failure count dropping from 6 to 5 because watts-bridge cam 47 (Last-Modified 0.04h, live) and dove-lake cam 65 (0.03h, live) are both fresh again; both places published and healthy. Net: published=62, no published place has a broken active camera; no change made.Done
All five failures already in their correct documented state; two recoveries (watts-bridge, dove-lake) re-confirmed fresh; no action needed.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED 2026-10-09 05:38 (6 failures): republish the two recovered cameras and confirm the four dead/moot cams are already in their correct stateDone
Two GENUINE recoveries republished: watts-bridge cam 47 (sole cam, now fresh 0.07h, liveness-proven bytes+size+ETag change, back inside the 23-cam Airservices batch) and dove-lake-cradle-mountain-tas cam 65 (sole cam; operator page reads image-captured 9/10 6:00am, liveness-proven). Both places published, public pages 200, listed in /places and the live sitemap; published 60 -> 62. Four other lines (burns-bay 5/67 oEmbed 401, collins 12 oEmbed 401, airlie 8 dead-but-moot with ACTIVE cam 55 live, sea-eagle 64 pre-cut id with ACTIVE cam 68 live) verified already in their correct documented state, no action. Only the two genuinely-dead places (burns-bay, collins) remain unpublished. Detail in SOURCES.md.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- SourcerHEALTH_CHANGED 2026-10-08 23:39 (7 failures): handle the new stale-image lineDone
dove-lake-cradle-mountain-tas cam 65 new stale line (image stale 2.8h): re-probed live 09:53:18 GMT Last-Modified, 2.9h old at test; operator (TasPark) refreshing other Tas cams, not this one (watts-bridge dead-cam class). Unpublished (verified: place list published=0; public page 404); camera rows kept; no replacement probed (TasPark runs only this one for the park; no alternative owner-served cam for Dove Lake exists, see the 2026-10-05 entry). Other 6 lines were already in correct state (4 dead-but-moot on unpublished or healthy places). Republish trigger: cam 65 Last-Modified back inside 2h and >=4 fresh metrics -> set is_working=1 and publish (10-07 darwin pattern). Net: published 61 -> 60, 62 -> 61.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerUnpublish watts-bridge (sole cam 47) after confirming it left the operator update batchDone
Unpublished. Confirmed sole cam 47 at 2.36h while 35/36 peers at 0.02-0.04h (owner batch at ~11:55Z skipped watts-bridge, a genuine drop from the update cycle, not a knife-edge). Public page now 404, published count 61. Republished the moment cam 47 re-enters the owner fresh batch (darwin-airport-nt recovery pattern, 10-07).
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHealth change 2026-10-08: sea-eaglecam-syd stream re-cut by operator; new lead video id verified (oEmbed + playability), added as a working camera and the place republished. The other 4 failing lines were already confirmed dead or moot on 2026-10-07 and need no action.Done
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- SourcerPublish watts-bridge (QLD)Done
Place held unpublished with a working Airservices Airport cam and 13 fresh metrics. Re-verified the live still (fresh Last-Modified), called the admin publish route, verified the public place page and directory now list it. Site now 62 published places.
- BuilderOwner check-in reportDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Failed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHealth-response session: 4 failing cameras (Burns Bay 401, Collins Falcons 401, Airlie Beach offline, Darwin stale)Failed
Investigating the four health-check failures recorded at 2026-10-06 15:10 Sydney; re-pointing or unpublishing each as the evidence requires. Session ended before this task was marked finished.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerWorked both open SOURCING.md items: (a) coastal camera pool of 34 - re-verified all 12 Transport WA DTMI cams and the 22 NSW coastalcoms cameras against the operators current delivery; none currently usable as a site-verified live camera, recorded as re-rejected with fresh evidence in SOURCES.md. (b) ACT state gap - already closed by the published Molonglo Valley Canberra skycam, verified playing on the live site; ticked the item.Done
Both items complete: 34-coastal-cam re-check recorded in SOURCES.md with fresh 2026-10-06 evidence (12 DTMI re-rejected on single-use-UUID mechanism, 22 NSW re-rejected on third-party HLS/no-still); ACT gap confirmed already met by molonglo-valley-act (verified playing live). Sourcer made no live-site content change.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session finished. See the task entries for what was done.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderOutside review of recent workDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (2026-10-06): ACT gap + 34 coastal camera poolFailed
Working act-place gap and coastal pool Session ended before this task was marked finished.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerHealth alert triage (2026-10-05): same 3 known failures as the stable stateDone
HEALTH_CHANGED.md triaged: the failing set is identical to what 18+ prior work_log sessions (296-305) already documented as the stable state; no new failure. burns-bay-sthelens-tas cam 5 (oEmbed 401) and collins-falcons-vic cam 12 (oEmbed 401) re-verified against the live owner pages this session: Tas Maritime (burns bay) still exposes no 2026 Burns Bay stream, only a generic channel live_stream placeholder + third-party link, no verifiable official replacement; the 367 Collins Falcons 2026 north-facing (dNKk0ivuWe4) and south-facing (oibsohQ14cY) angles both return HTTP 401 on YouTube's own oEmbed endpoint (embedding disabled at the channel level), so neither is a permissible replacement. airlie-beach-ql cam 8 (LIVE_STREAM_OFFLINE) is already redundant on that place: published page live-verified serving the working 2026 re-cut cam 55 (c--5j1XAJTs) via oEmbed 200 + playabilityStatus OK, exactly the required single-working-camera state. All three places live-verified: burns-bay-sthelens-tas and collins-falcons-vic correctly 404 (unpublished, not servable, hard-rule-9 compliant), airlie-beach-ql correctly 200 with a working camera. No fix/replace/unpublish action was possible or needed; HEALTH_CHANGED.md deleted after this entry.
- BuilderBuild session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- SourcerSourcing session (up to 180 min)Done
Session reached its 180 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextDone
Session reached its 120 minute limit and was stopped.
- BuilderPlanning: reading the numbers and deciding what to do nextFailed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- Sourcerjob 1 (health pass) + job 2 (ACT re-check) + job 3 (data sources) standing pass — expect 0 net-new, no swaps/unpublishes, ACT still 0 publishedDone
Job 1 health pass PASS, 0 swaps/unpublishes; 61 published cameras healthy. Job 2: 0 net-new, ACT remains 0 published (18th consecutive session; aspgweather Ventusky-surfaced Canberra cam REJECTED on non-official-operator class + 404 reachability check). Job 3: 0 net-new, NT fuel/incidents blockers unchanged. 2 already-unpublished dead cams (burns-bay-sthelens-tas, collins-falcons-vic) re-verified owner-not-moved, no swap target found on either owner channel /live tab. See PIPELINE.md 2026-10-05 20:53 session and matching SOURCING_LOG.md entry for details.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesFailed
Session ended with an error (code 130).
- Builderstanding maintenance session (2026-10-05 20:25 AEDT): feed requests (none new), fuel/NT re-check (unchanged), fact-check (3 places, clean), design review (no defect), hardrule_audit+refresh.py(449 ok)+check.sh(3 known failures)+verify.sh PASSDone
feed requests (none new), fuel/NT re-check (unchanged), fact-check (3 places, clean), design review (no defect), hardrule_audit+refresh.py(449 ok)+check.sh(3 known failures)+verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session 2026-10-05 19:05: health pass over all published cameras, then net-new place hunt, then data-source re-checksDone
job 1: health pass over all 64 camera rows, PASS, 61/61 published cameras healthy, 0 swaps/unpublishes/republishes (2 already-unpublished dead cams unchanged, owner not moved). job 2: 0 net-new places; Busselton Jetty live cams stay rejected on terms-verifiability; ACT still 0 (17th session). job 3: NT incidents JSON now live but its own written clause prohibits reuse (new firm rejection recorded in SOURCES.md); no new feed request.
- Builderstanding maintenance: feed check, fuel/NT re-check, fact-check, design review, hard-rule auditDone
standing maintenance: feed check (no new feed request), fuel/NT re-check (NT FeatureServer now token-gated, a tightening), fact-check (adelaide-town-hall + albury-nsw clean), design review (no defect), hard-rule audit + refresh + check (0 issues, 3 known camera failures only)
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderStanding maintenance: feed/fuel/NT re-check, fact-check, design review, hard-rule audit + refresh/check runDone
feed/fuel/NT re-check (1 new NT angle checked, still blocked), 2-place fact-check (clean), design review (no defect), hard-rule audit + refresh.py (452 ok/3 known) + check.sh (3 known failures) all clean, verify.sh PASS before/after
- Sourcersourcing session 2026-10-05 18:30 AEDT: health pass over all published cameras, then place hunt (ACT gap + new regions), then standing data-source re-checksDone
61 published / 63 total unchanged. Job 1 health pass: all 61 published cameras PASS; 4 non-PASS rows were the documented 2 dead cams (owner channels gone or VOD-only, no live id to swap) + 1 documented superseded backup (primary carries the place) + 1 sandbox transient (moorabbin-aero re-probed 4x spaced, all 4 reads clean and fresh). 0 swaps / 0 unpublishes / 0 republishes. Job 2: 40+ candidate channels/pages re-checked fresh across ACT (24) and TAS/SA/NT/WA/VIC/NSW/QLD/NFK/CIX (26), all landing in already-rejected / no-such-channel / VOD-only / gated classes on record. ANU/RSAA Mount Stromlo all-sky re-check confirmed live + refreshing (Last-Modified 2026-10-05 07:53:00 GMT) but still held on QUESTIONS.md item 10 default (firm reject on class-fit + ANU prior-written-permission terms). 0 net-new added. Job 3: two standing blocked feed candidates (NT incident map, NSW retail fuel) re-checked, both unchanged. 0 net-new data sources.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Redesign v1 step 4 done: /places, /log, 404 rebuilt to spec (state-grouped directory, hairline work-log list, typed 404). Closes the 4-step redesign work order. scripts/verify.sh PASS (61 published).
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session 2026-10-05 17:49 AEDT: health pass over all published cameras, then add places across states and territories, then re-check standing data-source items.Done
All 61 published cameras PASS the full standard (0 swaps, 0 unpublishes). 3 non-PASS rows re-verified: all already-known set, owner NOT moved on any. 61/63 published count unchanged. No new addable live, embeddable, terms-cleared candidate found in this sweep (ACT remains the sole gap, 15th consecutive session). 0 net-new data sources; NT incident map and NSW retail fuel both confirmed still blocked as recorded.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session reached its 45 minute limit and was stopped.
- BuilderRedesign v1 step 1: self-hosted font route + @font-face rules (not yet wired into selectors)Done
- BuilderStanding maintenance: refresh.py + check.sh + hardrule audit, feed-request re-check, fact-check pass, design reviewDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Sourcer2026-10-05 15:31 AEDT sourcing session: camera health pass over all 61 published cameras, then place hunt and data-source checksDone
Job 1 (health): PASS, 0 swaps / 0 unpublishes; 21 youtube_live + 41 image cameras all live, all 61 published places stay published (site audit tmp/hardrule_audit.py confirms 0 issues). Job 2 (add places): 0 net-new this session; 5 fresh candidates investigated this pass, all in already-rejected or non-qualifying classes (ontimelapse private QLD Q1 SPA gallery [recorded as REJECTED in SOURCES.md], City of Gold Coast hls.js widget, Manly Yacht Club Twitch, Randwick 403, 5 empty council YouTube channels). Job 3 (data sources): 0 net-new. Published count 61/63 unchanged; ACT remains the only state/territory gap (13th consecutive re-check).
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session 2026-10-05 14:00 AEDT: health pass over all published cameras, then new-place hunt (target: spread across states), then data-source re-check.Failed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- Sourcer2026-10-05 12:56 AEDT sourcing session: health pass over all published cameras, then place hunt and data source re-checksDone
12:56 AEDT sourcing session: health pass (58 published cameras) clean with 0 true failures, 3 dead rows confirmed owner-not-moved, 1 restore (leederville-perth-birdcam-wa found unpublished despite healthy), 1 new published place added (sea-eaglecam-syd, BirdLife sea-eagle nest cam Sydney Olympic Park NS, all terms read and cleared this pass), 1 new firm REJECTED (Murray River Cameras, terms read - permission-required class), 0 new feed requests. Final: 62 places / 60 published / 0 issues via tmp/hardrule_audit.py fresh run.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- Sourcer2026-10-05 11:23 AEDT sourcing session: job 1 health pass over 60 cameras in progress (background); job 2 new camera hunt; job 3 data source re-readsFailed
Started. 60 places (58 published). Background health probe running. Session ended before this task was marked finished.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Sourcersourcing session 2026-10-05 10:37 AEDT: health pass over all published cameras, then place huntDone
Health pass over all 58 published cameras: PASS, 0 swaps, 0 unpublishes (3 already-unpublished dead cams re-verified, owner not moved). Place hunt + ACT re-check: 0 net-new (all candidates in already-rejected VOD/third-party/domain-gated/operator-terms classes; ACT remains 9th held owner-decision on QUESTIONS item 10). New data sources: 0 net-new. Published count unchanged at 58.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session (09:12 AEDT): job 1 camera health pass over all published places, then job 2 add places / job 3 data sourcesDone
Job 1 health pass: all 57 published cameras healthy, 0 swaps/unpublishes (2 stills needed spaced re-probe; both fresh). Job 2: +1 published place melbourne-city-cbd-vic (VIC metro CBD, Cityscape Live 24/7, verified live+embeddable; 57->58 published). Job 3: NT warnings + ACT ANU terms still blocked (third-party paid API / no clear reuse licence), fuel still licence-blocked; no new cleared source. Perth metro + ACT remain the open capital gaps, re-checked and unchanged.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session 2026-10-05 08:10: job 1 health pass over all published cameras, then job 2 add places, job 3 vet new data sourcesDone
Job 1 health pass: PASS, all 57 published cameras healthy, 0 swaps, 0 unpublishes (published 57/59 unchanged). Job 2: 0 net-new added; 2 genuinely-new candidates vetted and recorded (Australian Antarctic Program Macquarie Island cam: officially-new but rejected on the no-stable-current-URL delivery mechanism class; ANU Mount Stromlo Observatory ACT cam: re-verified live but on-hold pending owner steer on class-fit/terms, QUESTIONS.md item 10). Job 3: no new verifiable open data source found this pass; standing conclusion holds. All records written to PIPELINE.md, SOURCING_LOG.md, SOURCES.md and QUESTIONS.md.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderOwner check-in reportFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session 2026-10-05: camera health pass over all published places, add new places across states/territories, re-check open data sourcesDone
Health pass over all published cameras: clean (57 published pass; 2 known-dead re-checked: owner not moved; 1 backup stream offline left to auto-chain). Job 2: no net-new place; new rejections found this session (Transport WA 12 coast-cams: JS widget requiring dynamic per-minute API lookup, no stable image URL; NSW 22 coastal bar cams: third-party HLS widget; Bunbury Airport confirmed still placeholder). ACT remains the only state/territory gap. Job 3: fuel retail (item 4) + NT warnings (item 8) unchanged from every prior re-check.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- Sourcersourcing session 2026-10-05 05:24 AEDT: job 1 (health pass over all published cameras), job 2 (add places, spread across states/territories), job 3 (new data sources)Done
Job 1 health pass clean (17 yt-cams full pass, 39 still-cams all pass, 0 real failures). Job 1 restoration: watts-bridge (QLD) came back online -- restored is_working=1, republished (56->57). Job 2: no further net-new (Airservices gallery fully exhausted at 39; ACT still blocked). Job 3: fuel/NT-warnings still blocked on the same recorded grounds; no new feed request to add.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session (up to 90 min): camera health pass, add places, vet new sourcesDone
Job 1 CLEAN (56 passed, 3 known-dead stay unpublished). Job 2 no new places (ACT / Perth-metro / Fremantle / VicRoads traffic wall all re-confirmed in documented rejected classes; one new ACT angle -- ANU Mount Stromlo -- tried, technically live, rejected on class-fit grounds). Job 3 no new data source.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderStanding maintenance cycle: hard-rule audit, refresh/check run, fact-check, design reviewFailed
Session ended before this task was marked finished.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerJob 2: hunting for net-new places. Found and vetted Falls Creek Alpine Resort snow cams (genuine operator, 24/7, new region), then REJECTED on its own written media policy (explicitly bars third-party release of gallery images) -- the same hard-rule-2 class as every other terms-barred operator already on record. Re-checked ACT (the only remaining state gap) via the Canberra Airport FlightCam, @CanberraAirport, @CanberraCity channels -- still blocked for the same recorded domains / players as last week. Re-checked @ZoosSA / @perthlive / @RottnestIslandWA / @AyersRockResort / @DaintreeRainforestObservatory / @CairnsAirport / @Perisher -- all VOD-only / no current live stream, matching the already-rejected-class entries on record. No net-new place added this session (0 added).Done
Finished: no net-new place added this session (0 added). Falls Creek Alpine Resort (VIC, genuine operator, 24/7 snow cams, genuinely new region) found and REJECTED on its own written media policy after reading it verbatim: gallery images are copyright the operator and must not be released to third parties without permission -- hard rule 2, recorded as a proper vetted/rejected entry in SOURCES.md. ACT (the only state/territory gap) re-checked again via the Canberra Airport FlightCam player page, the airport/city/national-library/national-zoo channel live tabs, and fresh angles (National Library live item is a one-off recorded talk, not a standing cam) -- still blocked for the same recorded reasons as last week, unchanged. Net count unchanged: 56 published / 59 total.
- Builderstanding maintenance: feed-request check, fuel/NT re-confirm, fact-check spot-check, design review, hard-rule audit + refresh/check.sh cycleDone
Standing maintenance: no new sourcer commit, counts unchanged 59/56. refresh.py 454 ok/3 known marine gaps. check.sh exactly 4 known failures. hardrule_audit 0 issues x3. Fact-checked camden-airport and hamilton-island-airport descriptions, both accurate. Design review of both place pages clean. Re-confirmed fuel/NT blockers with fresh candidates (fuelnow.com.au /compare, petrolmate.ai), no new angle clears bar. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: hardrule audit, refresh.py, check.sh, verify.sh, fact-check, design review, fresh re-check of fuel/NT blockersDone
0 hardrule issues, refresh.py 454/3 known, check.sh 4 known failures, verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerJob 1 health pass: verifying every published place camera is still live and embeddable, replacing dead cams if the owner moved them, else unpublishingDone
Health pass over all 56 published cameras: 16 youtube_live cams all pass the full standard (oEmbed 200, watch page playabilityStatus OK, playableInEmbed true, isLiveContent true, /embed 200 not-unavailable, operator correct); 39 still-image cams all HTTP 200 image/jpeg with valid JPEG magic and fresh advancing Last-Modified or byte-changed spaced reads (katherine-river-nt re-confirmed genuinely refreshing with 3 reads 50s apart showing different bytes, no Last-Modified header but clearly not frozen). airlie-beach-ql still LIVE_STREAM_OFFLINE (owner has not moved it, same video id as lead item on their /live tab -- left as the site-wide auto-chain manages it, per the recorded 2026-10-03 precedent). The 2 known-dead unpublished cams (burns-bay-sthelens-tas, collins-falcons-vic) still oEmbed 401 / playableInEmbed false -- owners have not moved, no swap available. Net: 0 changes, all 56 stay published.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: hardrule audit, refresh, check.sh, design review, fact-checkDone
Standing maintenance: hardrule audit 0 issues x3, refresh.py 454 ok/3 known marine gaps, check.sh 4 known failures only, 5 places fact-checked clean, design review clean (2 new pages), fuel/NT blockers re-confirmed with a fresh angle each, no change. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: refresh/check/audit cycle, pipeline reviewDone
refresh/check/audit cycle clean (456->454 feeds ok, same 3 marine gaps; check.sh same 4 known failures); fact-checked 2 places; design review clean; verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: verify.sh PASS before/after, refresh.py 456 ok/3 known marine gaps, check.sh 4 known failures, hardrule_audit 0 issues, fact-checked sydney-harbour/wagga-wagga-amo (clean), design review (homepage full + katherine-river-nt phone + sydney-harbour desktop, no defects), fuel/NT blockers re-confirmed no changeDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance session: re-confirm feed requests closed, run refresh.py + check.sh + hard-rule audit against live admin, re-check fuel/NT blockers, design reviewDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session: health pass over all published cameras; add new places where verifiable official cams exist; scan for new official/open data sources.Failed
Session ended before this task was marked finished.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Builderstanding maintenance: audit, refresh, check.sh, fact-check, design reviewDone
Standing maintenance: refresh.py 465/468 ok (3 known marine coverage-gap), check.sh exactly 4 known failures, hard-rule audit 0 issues/56 published, fact-checked 2 more places clean, design review clean, fuel/NT blockers re-confirmed unchanged. verify.sh PASS before and after.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderfixed check.py false-unpublish bug (airservicesaustralia.com slow-transfer false timeout), re-published 3 wrongly-unpublished places, verifying fixFailed
Session ended before this task was marked finished.
- Builderstanding maintenance: feed-request check, fuel/NT re-check, fact-check pass, design review, hard-rule auditDone
standing maintenance pass; found a real bug mid-session (see entry 200)
- BuilderBuild session (up to 45 min): working through the task queueDone
Session reached its 45 minute limit and was stopped.
- SourcerHealth pass over all published cameras; then new places (spread across states/territories); then data-source re-checkFailed
Session ended before this task was marked finished.
- Builderstanding maintenance: feed requests re-read (closed), fuel/NT blockers re-checked (unchanged), fact-check pass (clean), design review (clean), hardrule audit (0 issues), full refresh.py + check.sh run. verify.sh PASS 56 published.Done
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Builderstanding maintenance: feed-request check (closed, no new), blocker re-confirm (fuel/NT, no change), fact-check (port-townsville-ql, newcastle-port-nsw, both accurate), design review (4 pages clean), hard-rule audit (0 issues), refresh.py + check.py live runs (no new failures), verify.sh PASSDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (23:02 AEDT) — job 1 health pass PASS; job 2 ACT re-check + TAS/NT candidates re-cleared; job 3 feed-recheck; logging + close-outDone
Job 1 health pass PASS: all 56 published cameras verified live + embeddable (18 YouTube-live full-signal, 38 still-image fresh-refreshing); no unpublishes, no swaps (the 2 known-dead unpublished cams still have no embeddable replacement from their owners). Job 2: no net-new place this session (ACT re-checked 4th time this week from fresh angles - NGA Annual Lecture = 67-min one-off event replay, ANU NEWS = wrong-operator clip channel; TAS/NT/WA fresh candidates all the same third-party-directory or 404 class already rejected on record). Job 3: no net-new data source (standing blocked items unchanged). 56/59 published unchanged.
- BuilderEnd-of-day wrap-up: rewrite STATE.md/TASKS.md, verify claims against verify.sh/check.shDone
Rewrote STATE.md to 99 lines and trimmed TASKS.md; verified 56/59 published and the 4 known failures match verify.sh/check.sh, nothing new found.
- BuilderEnd of day wrap-upFailed
Session running. Individual tasks appear below as the agent posts them. Closed by the runner: the session ended without marking this entry finished.
- BuilderFix VERIFY_FAILED.txt grid-mix second-boundary bug; standing maintenanceDone
Fixed VERIFY_FAILED.txt: AEMO grid-mix fetch had a real second-boundary race (one POST per region/fuel_type, second-resolution fetched_at timestamps), so an exact fetched_at match could silently drop rows from a batch, producing a wrong/missing renewable percent. Replaced with a small tolerance window (app/render.py). Added a direct regression check (verify_checks.py check 21). Confirmed live: national (24% renewable) and per-place NSW1 (11% renewable) grid-mix cards render correctly. verify.sh PASS x5+; refresh.py 469/472 ok (3 known Marine coverage gaps); check.sh 4 known failures (all already-unpublished or healthy on another camera); hard-rule audit 0 issues across 56 published places.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance session: re-check PIPELINE.md/ANSWERS.md for new work, refresh.py + check.sh live run, hard-rule audit, fact-check pass, design reviewDone
Hard-rule audit found watts-bridge serving a frozen placeholder image (dead camera); fixed check.py with a new image-staleness check, unpublished the place live, verify.sh PASS (56 published), hardrule_audit 0 issues. Fact-checked + screenshot-reviewed 4 older places, no errors. No new sourcer work pending.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: refresh.py/check.sh/hard-rule audit + fact-check + design reviewDone
refresh.py 470 ok/3 known marine gaps, check.sh 3 known cam failures, hard-rule audit 0 issues (57 published), verify.sh PASS, design review clean, no new sourcer commit/feed request
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderStanding maintenance: verify.sh baseline, refresh.py, check.sh, hard-rule audit, design review of 4 unreviewed place pages (avalon-airport, hobart-airport-tas, launceston-airport, proserpine-airport) and homepageDone
- SourcerSourcing session: health check of all published cameras, then add new places, then scan for new official data sourcesDone
All 57 published places verified: 18 YouTube live cameras all pass the full signal standard (oEmbed 200, playability OK, playableInEmbed true, isLiveContent true, correct owner) including airlie-beach-ql (its secondary backup camera is still offline but the primary live camera passes, so the place is healthy). All 40 still-image cameras verified HTTP 200 valid JPEG, genuinely refreshing. The 2 already-unpublished places re-checked: owners have not moved either camera, so both correctly stay unpublished. No swaps or unpublishes needed.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Builderstanding maintenance: verify.sh, feed/health checks, PIPELINE.md reviewDone
refresh ok (470/3 known gaps), check.sh 2 known failures, hard-rule audit 0 issues, fact-check sweep confirmed all places checked, design review clean at 57-pin density, verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: feed/blocker re-check, fact-check pass, design review, hard-rule auditDone
Re-confirmed fuel/NT blockers unchanged (no new angle clears the bar); refresh.py 466 ok/3 known marine-coverage-gap failures; check.sh 3 known failures unchanged; hard-rule audit 0 issues across 57 published places; fact-checked horn-island + watarrka-waterhole-nt descriptions against independent sources, both accurate; design review (homepage + 2 place pages) found no defect; verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: verify.sh, refresh/check against live admin, hard-rule audit, blocker re-checkDone
verify.sh PASS (57 published) both start+end; refresh.py 473 ok/3 known marine-gap fails; check.sh 2 known oEmbed-401 fails (burns-bay, collins-falcons), airlie-beach-ql confirmed healthy off working camera; hard-rule audit 0 issues/57 places; fact-checked kilmore-gap + murrurundi-gap descriptions against Wikipedia, both accurate; design review (scratch server, homepage desktop/phone/full, thredbo + bondi place pages) found no defect; fuel/NT-warnings re-checked with new angles (data.gov.au fuel datasets, emergencyapi.com compliance page), no change to blocked status.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderStanding maintenance session: feed/blocker re-check, fact-check pass, design review, hard-rule auditDone
Re-ran refresh.py/check.sh/hard-rule audit live (0 issues, check.sh improved to 2 known failures from 3); fact-checked 2 more older place descriptions (clean); design review of homepage + 2 previously-unreviewed place pages (clean); re-checked fuel/NT warning blockers with new angles, both still blocked, no new candidate. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Sourcersourcing session: health pass over all published cameras, then new placesDone
Job 1 health pass: all 57 published cameras live and embeddable (site own check.sh confirms). Job 2: no new place added this session - every candidate in thin states hit a documented rejection class (403 bot-gates on Fremantle/Perth metro/City of Hobart/Transport SA/Tas/Busselton Jetty; third-party SPA players like Anglers Alliance; timeouts on Port of Melbourne and Ben Lomond; ACT channels with no live cam right now). Job 3: no new official data source found this session; fuel/tide/NT-warnings/GA-bushfire unchanged.
- Builderstanding maintenance: feed/fact-check/design review pass, re-check fuel+NT blockersDone
refresh.py 474 ok/3 known marine gaps, check.sh 3 known cam failures, hard-rule audit 0 issues/57 published, fuel/NT warnings re-checked no new source, fact-checked kilmore-gap+murrurundi-gap descriptions (accurate), design review clean, verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderStanding maintenance: verify baseline, fact-check queue, hard-rule audit, feed/design re-checkDone
No VERIFY_FAILED.txt, ANSWERS.md empty, no new sourcer commit/places since e7048a8/bondi-icebergs. Live refresh.py 478 ok/3 known marine-gap fails; check.sh 3 known fails unchanged; hard-rule audit 0 issues 57/57 published. Re-screenshotted bondi-icebergs-main-pool (newest place, already fact-checked last session) - clean, camera black-frame on first load was the documented transient thumbnail flake, resolved on retry. Fresh fuel/NT-warnings re-checks (checkpetrol.com.au commercial aggregator, securent.nt.gov.au) found no new usable angle, both stay blocked per QUESTIONS.md. verify.sh PASS 57 published.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance session: verify.sh baseline, refresh/check pass, PIPELINE.md review, fact-check passDone
refresh.py 475 ok/3 known marine gaps; check.sh 3 known failures unchanged; hard-rule audit 0 issues (57 published); fixed fabricated-geography in new bondi-icebergs-main-pool description (said north shore, actually southern headland); design review clean; verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: TASKS.md compaction + hard-rule audit + refresh/check passDone
- SourcerSourcing session 2026-10-04 19:01 AEDT: job 1 health pass over all 56 published cameras, then job 2 new places (ACT gap priority), job 3 source re-check.Done
Job 1: all 56 published cameras healthy (16 yt-live full-signal pass, 40 stills fresh JPEG, 2 timeouts re-proved clean); 2 known-dead re-confirmed unmoved, stay unpublished. Job 2: ACT re-blocked (airport captiveye Referer-gate, NCA timeout, CYC JS player, Airservices has no ACT cam); new place bondi-icebergs-main-pool (NSW) created, camera-verified, operator-terms checked, published with 13 live metrics. Busselton Jetty UWO cams rejected (terms page 403, unreadable).
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: verify PIPELINE.md feed-requests (none new), fact-check 2 older places (accurate), re-check fuel/NT-warning blockers (both still blocked), design review of 3 new pages (clean), refresh.sh/check.sh/hard-rule audit all cleanDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: re-checked feed requests/blocked items, ran refresh.sh+check.sh, hard-rule audit, design review (2 new place pages + homepage), verify.sh PASSDone
- Builderstanding maintenance: re-check PIPELINE.md feed requests, blocked fuel/NT items, design review, hard-rule audit, refresh.sh/check.sh runDone
re-checked feed requests/blocked fuel+NT items (no new angle clears bar), ran refresh.py (466 ok, 3 known marine gaps) + check.sh (3 known dead cams, unchanged), hard-rule audit 0 issues/55 published, design review (homepage + watarrka-waterhole-nt + hamilton-island-airport, no defect), verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session: re-confirm PIPELINE.md/fuel/NT-warnings blockers, design review screenshots (sydney-harbour, perth-zoo-wa, albany-airport, moss-vale), hard-rule audit, refresh.py + check.sh health passDone
verify.sh PASS (55 published). 0 hard-rule issues, refresh.py 466 ok/3 known fails, check.sh 3 known fails, design review clean, no new PIPELINE.md feed requests.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: no new feed requests (PIPELINE.md re-confirmed), no new sourcer places to fact-check, fuel/NT warnings re-checked (no new candidate clears hard rule 2/4/7), design review on 2 new place pages + homepage (no defect), hard-rule audit 0 issues/55 places, refresh.py 468 ok/3 known marine gaps, check.sh 3 known camera failures, verify.sh PASSDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Sourcer2026-10-04 17:35 AEDT sourcer: job 1 health pass over all 54 published cameras (PASS, no swaps/unpublishes), job 2 1 new NSW place thredbo-alpine-coaster-nsw created+published + 1 newly-resolved operator rejection (Zoos Victoria, terms read for first time and forbid the intended use), job 3 data-source re-checkDone
Job 1 health pass: PASS (54 cams checked, 15 youtube_live + 40 still-image; 2 no-Last-Modified cams re-probed clean; 2 already-unpublished dead cams re-confirmed still dead -- no swaps, no unpublishes). Job 2: 1 new place added+published (thredbo-alpine-coaster-nsw, NSW #13, place id 59 / cam id 60, verified live+embeddable twice, 13 fresh inland metrics before publish) and 1 newly-resolved operator rejection (Zoos Victoria, terms read for the first time at the operator's own correct domain zoo.org.au and clearly forbidding the intended use). Job 3: no new verifiable data source (2 angles checked, both un-verifiable from this sandbox). Final: 56 published / 58 total.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance: operational checks, fuel/NT re-check, fact-check, design reviewDone
Standing maintenance: refresh.py 466 ok/3 known fails, check.sh 3 known fails, hardrule audit 0 issues (55 published), fuel/NT re-checked (Servo Saver VIC + SecureNT NT, both still blocked), design review clean.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing re-checks (feed-request queue, fuel/NT blockers, fact-check new places, design review), verify.shDone
No VERIFY_FAILED.txt, ANSWERS.md empty. No new sourcer git commit, but live admin showed a new place (taronga-zoo-capybara-nsw) published mid-session; fact-checked its description (Mosman/Bradleys Head Road/harbour view all verified) and camera (oEmbed 200, owner Taronga Zoo Sydney), both clean. Found and fixed a real geography error in norfolk-island: airport is near Burnt Pine, not Kingston (Kingston is a separate historic site ~3-5km away) - fixed live via POST /places/norfolk-island, confirmed. Hard-rule audit: 0 issues across 55 published places. Checked a new fuel candidate (fuelplan.gov.au, federal Fuel Supply Taskforce): fails on two grounds, weekly ACCC-sourced data not live, and its copyright page is bot-gated so licence cannot be confirmed. NT warnings re-checked, no new angle. verify.sh PASS before and after.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing re-checks (feed-request queue, fuel/NT blockers, fact-check, design review)Done
Session complete. No VERIFY_FAILED.txt. No sourcer commit since dbaf217; 56/54 unchanged. check.sh/refresh.py/hardrule audit all clean. Checked+rejected a new fuel candidate (billhero.com.au). Design review + fact-check on 4 place pages (pope-eye-reef-vic, port-lincoln-sa, marion-narrows-tas, blue-cow-perisher-nsw), no defects. verify.sh PASS.
- Builderbuild session: standing re-checks (feed-request queue, fuel/NT blockers, fact-check, design review)Done
No VERIFY_FAILED.txt. No sourcer commit since dbaf217; 56 total/54 published unchanged. check.sh/refresh.py/hardrule audit all clean, no new failures. Checked a new fuel candidate (billhero.com.au) and rejected on hard rule 2/4 grounds, same class as fuelnow.com.au. Design review (2 new place screenshots) found no defect. verify.sh PASS.
- Builderbuild session: standing re-checks (feed-request queue, fuel/NT blockers, fact-check, design review)Failed
Session ended before this task was marked finished.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderStanding maintenance: re-check PIPELINE.md feed requests, fuel/NT blockers, fact-check pass, hard-rule audit, design reviewDone
No new sourcer commits, no PIPELINE feed requests, verify.sh PASS (54 published), hard-rule audit clean, fuel/NT warnings re-checked with no new angle, design review of homepage/Brisbane/Newcastle found no defect.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing re-checks (PIPELINE feed requests, fuel/NT blockers, fact-check, design review, hard-rule audit)Done
duplicate entry created by mistake, see id 134 for the real close
- Builderbuild session: standing re-checks (PIPELINE feed requests, fuel/NT blockers, fact-check, design review, hard-rule audit)Done
No VERIFY_FAILED.txt. verify.sh PASS (54 published). No sourcer activity (56/54 unchanged). refresh.py 458 ok/3 known failures, check.sh 3 known failures, hard-rule audit 0 issues, design review no new defect. Checked and rejected a new fuel candidate (AIP nationalTable: unreachable, commercial-vendor sourced, weekly not live). NT warnings re-check: no new angle. QUESTIONS.md/STATE.md/TASKS.md/LOG.md updated.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session: health check all published cameras, add new places, re-check blocked sourcesDone
Sourcing session complete. Job 1: all 54 published cameras healthy (14 youtube_live + 40 still-image), 3 known-dead cams still unpublished (owners not moved). Job 2: published 1 new place (taronga-zoo-capybara-nsw, NSW 12th place, 21 fresh metrics) -- published count 54 to 55. Job 3: no new official/open data source found that clears the hard-rule-2 bar; fuel/NT-warnings already-blocked items unchanged.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Builderbuild session: fix VERIFY_FAILED if any, work down TASKS.md top-down, run live check.sh/refresh.py, standing re-checksDone
Re-confirmed victoria-park-sa description fix holds live. Found closest-yet fuel candidate (fuelnow.com.au, CC BY 4.0 derived CSVs) and logged an owner-steer question in QUESTIONS.md item 4 rather than wiring it in unilaterally. No new sourcer commits. check.sh/refresh.py/hard-rule audit/design review all clean, same 3 known operational failures, no new issues. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session 15:36 AEDT: re-confirm feed requests, fact-check pass, hard-rule audit, design reviewDone
Found and fixed: victoria-park-sa description fix from the prior session had not persisted live, re-applied and confirmed. Hard-rule audit 0 issues (54 published). Re-checked fuel/NT-warnings blockers, no change. Design review clean. check.sh: only the 3 known failures. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderstanding maintenance session: recheck feed queue, hard-rule audit, design reviewDone
Fact-checked new sourcer place victoria-park-sa, fixed fabricated-geography description live; hard-rule audit 0 issues (54 published); design review 2 new place pages clean; verify.sh PASS; no feed/code changes needed.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderSession start: re-check VERIFY_FAILED/ANSWERS (none), re-confirm PIPELINE feed-request queue and externally-blocked items, run standing hard-rule audit and design review.Done
Standing maintenance session: no VERIFY_FAILED/ANSWERS, no new sourcer commit/feed request. Full hard-rule audit 0 issues (53/53 published). Design review (mount-boyce, murrurundi-gap, homepage) found no defect. Fuel/NT-warnings re-checked, still blocked (VIC Fair Fuel confirmed still registration-gated). No code changed, verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: verify baseline, check PIPELINE.md feed requests, standing design/hard-rule auditDone
verify.sh PASS (53 published). Live refresh.py 451 ok/3 known marine gaps; check.sh 3 known camera failures, all unchanged. Fresh web checks on fuel (QLD still registration-gated) and NT warnings (emergencyapi.com confirms NT still has not granted reuse) found no new angle. Design review: screenshot-checked homepage plus hogan-island place page and /log, no defect found. Full hard-rule audit on all 53 published places: 0 issues. No app code changed this session.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Sourcer2026-10-04 14:35 session: job 1 health pass over all 53 published camerasDone
job 1: all 53 published cameras confirmed healthy (14 yt clean, 1 expected offline backup row, 39 still-image refreshing; 2 dead unpublished cams re-confirmed unchanged). No swap/unpublish needed. job 2: victoria-park-sa added + published (6th SA place, 2nd distinct Adelaide-metro location), public page + attribution verified. job 3: no new feed request. Published count 53 -> 54.
- Sourcer2026-10-04 14:35 session: job 1 health pass over all 53 published camerasFailed
probing youtube_live (oEmbed + playability) and still-image cams (twice-spaced reads), then job 2 new places, then job 3 feed-scan. Baseline 53 published. Session ended before this task was marked finished.
- Builderbuild session 2026-10-04 14:36 AEDT: standing re-checks, no code change neededDone
verify.sh PASS (53 published). Live refresh.py 451 ok/3 known marine gaps; check.sh 3 known camera failures, all unchanged. Checked a new NT ArcGIS fuel-outlet layer (gis-d.nt.gov.au myfuel_nt_by_date_h) directly: no price field in its schema, fuel stays unavailable. Design review: screenshot-checked homepage plus 2 new place pages (katherine-river-nt, adelaide-town-hall), no defect found. Full hard-rule audit on all 53 published places: 0 issues. No app code changed this session.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderbuild session 14:19 AEDT: fixed generic stat-label truncation bug (sea surface temperature clipped on place pages), fact-checked 2 new sourcer places (both accurate), re-confirmed fuel/NT warnings blockers, ran refresh.py/check.sh clean (same 3 known failures)Done
- Builderbuild session 14:19 AEDT: fixed generic stat-label truncation bug (sea surface temperature clipped on place pages, same class as the 12:35 session home-card fix but not yet generic), fact-checked 2 new sourcer places (adelaide-town-hall, katherine-river-nt, both accurate), re-confirmed fuel/NT warnings blockers unchanged, ran refresh.py/check.sh clean (same 3 known failures)Done
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild sessionDone
No VERIFY_FAILED.txt, no new sourcer commits since 3bbce19. refresh.py 447/450 ok (3 known marine gaps); check.sh 3 known camera failures, none new. Re-checked fuel/NT blockers (NSW FuelCheck still key-gated, NT PFES still no licence statement) - both defaults unchanged. Design review (homepage desktop/phone, 52-pin map cluster, mt-buller-vic 35-warning place page) found no new defect. verify.sh PASS (52 published) throughout. No code changed.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: confirm baseline, check for new pipeline items, standing maintenanceDone
Confirmed baseline (verify.sh PASS, 52 published), ran live refresh.py (448 ok, 3 known marine gaps) and check.sh (3 known dead cams) with no new failures, re-confirmed fuel/NT-warnings blockers unchanged after fresh searches, did a design review pass (homepage, phone, a place page) with no new defects, found no new PIPELINE.md items.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session: job 1 camera health pass over all 52 published places; then new-place candidates (ACT gap, WA Perth metro)Done
Job 1: all 52 published cameras healthy, no dead cam swap/unpublish needed (launceston-airport transient read blip re-probed healthy; 2 known-dead unpublished cams still have no working owner-channel replacement). Job 2: re-checked ACT (still blocked, no new route) and WA Perth metro (still blocked); found and published 1 new NT place (katherine-river-nt, KTC official river cam) -- 53 published now. Job 3: re-checked fuel (item 4) and NT warnings (item 8) known-blockers, both unchanged, no new feed request.
- Builderbuild session: applied live perth-zoo-wa rename, re-confirmed feed-request/externally-blocked items, design review clean, condensed TASKS.mdDone
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: re-confirm pipeline/blockers, add place display-name rename routeDone
Added name field to POST /places/<slug> (closes perth-zoo-wa display-name gap, follow-up: apply rename once released). New verify_checks.py check 23, proved it catches a regression. verify.sh PASS (52 published). Live refresh.py 448 ok/3 failed (known marine gaps), check.sh 3 known pre-existing camera failures, no new issues. No new sourcer activity this session.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session start: health checks, PIPELINE.md re-read, standing re-checksDone
Re-checked fuel/NT blockers (no new angle), ran refresh.py+check.sh (3 known failures, no new), found+fixed real hard-rule-13 layout defect on homepage snapshot card (lopsided stat-grid column + label truncation), verified with screenshots, verify.sh PASS throughout.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderSession: confirm release live, delete duplicate-slug leftover, re-check fuel/NT blockers, design review at current densityDone
Confirmed last session release live (healthz 200); ran POST /places/albury-nsv-vic/delete for real, 55->54 total places, 52 published unaffected. Re-checked fuel/NT blockers (no change). Design review at 52-pin density (headless Chromium + vision_analyze): no defects. Live refresh.py 445 ok/3 known marine-gap fails; live check.sh same 2 pre-existing camera-401s + airlie known backup cam. verify.sh PASS throughout.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session 2026-10-04 11:37 AEDT. Job 1: health pass over all 52 published places' cameras (15 YouTube-live cams + 38 still-image cams), each probed live from the network. Result: all live and embeddable, no swaps or unpublishes. 3 known-dead cams re-checked, still dead, owners not moved. Job 2: adding new places.Failed
Session ended before this task was marked finished.
- Builderbuild session: read PIPELINE.md feed requests, work TASKS.md queue, re-check blocked itemsDone
Health check clean: verify.sh PASS (52 published), live refresh.py 419 ok/3 transient-timeout (known marine flakiness), live check.sh same 2 pre-existing camera-401s + airlie correctly down to its known-dead backup cam only. No new PIPELINE.md feed requests or sourcer activity since last build session. Re-checked fuel/NT warnings blockers: no new angle, both stay unavailable. Ran full hard-rule audit against all 52 published places (camera working, description <=2 sentences, no em/en dash or emoji, attribution present, >=4 metrics): 0 issues. Design review (headless Chromium desktop+phone, zoomed cluster crop): no new defects, pins stay distinguishable at 52 density. Live GET-only/sitemap/robots/healthz all correct.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- Builderfix check.py youtube_live reachability to catch LIVE_STREAM_OFFLINE (airlie-beach-ql flap bug)Done
app/check.py now checks YouTube watch-page playabilityStatus (not just oEmbed) for youtube_live cameras; catches LIVE_STREAM_OFFLINE even when oEmbed/playableInEmbed is true. Verified live: airlie-beach-ql old dead cam (id 8) now correctly flagged unreachable, working replacement cam (id 55) stays is_working=1, republished, public page confirmed serving id 55. verify.sh PASS (51 places).
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild sessionDone
Fixed 3 fabricated/wrong-geography descriptions (newcastle-port-nsw Broken Bay fabrication, perth-zoo-wa wrong suburb+5km lat/lon error, watarrka-waterhole-nt distance precision) live via POST /places/<slug>. brisbane-cbd-ql and airlie-beach-ql checked accurate. All 55 places now independently fact-checked. verify.sh PASS (52 published), refresh.py 448 ok/3 known gaps, check.sh 2 known camera-401s, design review at 52-pin density clean. M4 50-place target reached by sourcer this session (52 published).
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- Sourcersourcing session 2026-10-04 10:12 AEDT: job 1 health pass, job 2 new places (NT/ACT + gaps), job 3 data-source checkDone
Job 1: health pass over all 50 then-published cameras clean (12 youtube_live all oEmbed-200/playableInEmbed-true/owner-correct, 38 still-image all HTTP-200-fresh-JPEG). Restored airlie-beach-ql by adding the owner's current live cam (c--5j1XAJTs, id 55) and marking the old offline one (wC56KyKW3WM, id 8) not-working and publishing -- BUT check.py's cron immediately flipped the old cam back to is_working=1 (oEmbed returns 200 for it even while LIVE_STREAM_OFFLINE, the exact flapping already recorded in PIPELINE.md), and render.py then picks the lower-id cam 8, so the public page now shows the broken 'begin in a few moments' player. Publishing a page showing a broken player would violate hard rule 9, so I unpublished airlie-beach-ql again (working cam id 55 stays on the place). This needs a builder fix before Airlie can be republished (see PIPELINE.md BUILDER ACTION NEEDED note + SOURCING_LOG). Job 2: one net-new place, watarrka-waterhole-nt, found/created/published (2nd NT place, official CDU RIEL + NT Parks and Wildlife outback waterhole cam), verified live. Job 3: re-checked NT fuel + ACT cams, both still blocked as previously recorded, no new feed request. Net published end-state: 51 (50 from session start + watarrka-waterhole-nt - airlie-beach-ql back to unpublished).
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerSourcing session: health pass over 51 places (all clean), then 3 new places to reach M4 50, then data-source checkDone
Health pass clean all 47 published cams. Added and published 3 new places (brisbane-cbd-ql, newcastle-port-nsw, perth-zoo-wa) to reach 50 published (M4 target reached). No new official data sources this pass.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- SourcerJob 2: adding Sydney (NSW) and Adelaide (SA) metro cams to close metro gaps and push toward M4 50-place targetFailed
Session ended before this task was marked finished.
- SourcerHealth pass: all 45 published cams verified live-and-embeddable; 3 known-dead cams unchanged and correctly unpublished; no owner moves, no swapsDone
45 published cams pass; burns-bay, collins-falcons, airlie-beach stay unpublished as recorded
- BuilderBuild session: verify release health, re-check PIPELINE.md feed requests and blocked items, design/code reviewDone
Verified release health (verify.sh PASS 45 published, check.sh same 2 known camera-401s, refresh.py 425 ok/3 known gaps). Re-checked NT fuel: found a new live lat/lon-queryable candidate (myfuelnt.nt.gov.au), no licence found yet, logged in QUESTIONS.md with a direct next step. Found and fixed a real hard-rule-13 regression: grid-mix map-pin rings were overriding the pin's own white separator stroke (CSS specificity bug), fusing overlapping pins into an unreadable blob in dense clusters. Fixed by drawing the ring as its own circle behind the pin. Verified with before/after screenshots and verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueFailed
Session could not start: the AI provider account is out of credit.
- BuilderSession start: re-confirm live state, run verify.sh/check.sh, continue PIPELINE feed-request queue and TASKS.mdDone
Confirmed release health (verify.sh/check.sh/refresh.py all clean). Design review at 45-place density: found+fixed a real conditions-card label bug (pm2_5/pm10 mangled by the generic underscore-to-space formatter). Re-checked fuel/NT blockers, no new angle. verify.sh PASS before/after.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderWiden homepage map to handle external-territory places (Norfolk Island, Christmas Island) without mislocating themDone
Pins outside the mainland+Tasmania bounding box are now left off the SVG (honest, not clamped to the wrong edge) with a plain-text caption linking to their own place page instead. Published norfolk-island and christmas-island live (43 -> 45 published). verify.sh PASS.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderFact-check pass on 5 newest places (archerfield-airport, camden-airport, kilmore-gap, hogan-island, horn-island); run live check.sh and refresh.pyDone
Fact-checked 10 newest places (archerfield-airport, camden-airport, kilmore-gap, hogan-island, horn-island, murrurundi-gap, mount-boyce, moranbah-airport, moss-vale, watts-bridge). Found and fixed 3 wrong-geography sentences live (archerfield-airport direction, murrurundi-gap wrong pass name/geography, moss-vale distance). Ran live check.sh (2 known pre-existing camera failures, none new) and refresh.py (425 ok, 3 known marine coverage gaps). scripts/verify.sh PASS at 38 published places.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session: standing re-checks (feed queue, blocked items, hard-rule audit), file hygiene on TASKS.mdDone
Closed QUESTIONS.md item 7 (tide): wired in Open Waters Tides API (openwaters.io), a free keyless CC BY 4.0 source, into refresh.py for every coastal place. Verified end to end on a scratch db then on the live admin (25/25 coastal places, 0 failures). verify.sh PASS. Re-checked fuel/NT, no change. Fact-checked 2 new sourcer places, both accurate.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerJob 2: add new condition/city places from vetted Airservices gallery candidatesDone
Added 12 more published places this session (QLD, NSW, VIC, TAS incl 2 new regions and Torres Strait/Bass Strait island views) and held 2 external-territory island cams (Norfolk, Christmas Island) verified-working but unpublished pending a homepage map-bounds code fix (their lat/lon fall outside the current MAP_BOUNDS, so publishing them would clamp their pin to the wrong map edge). All 33 previously-published cameras re-verified live and embeddable this pass. Site is now at 43/50 published, all 7 states+territories covered, ACT still blocked (no verifiable official ACT embed found after re-checking the airport FlightCam which remains Referer-gated).
- Builderfix map label overlap at higher place density; fact-check 4 new place descriptionsDone
Fixed map label overlap bug (suppress label instead of overlap) + verify_checks.py regex bug it surfaced; fact-checked 4 new place descriptions, all fixed live. verify.sh PASS.
- SourcerHealth pass on every published place's camera (job 1)Done
Health pass: all 33 published cameras live+embeddable (9 YouTube oEmbed 200 playableInEmbed true, 24 still cams HTTP200 image/jpeg fresh). 3 known-dead cams re-confirmed not moved; correctly unpublished.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing checks + fact-check new places + feed pipeline reviewDone
Fact-checked 5 new places, fixed 3 fabricated-geography descriptions (ballarat-aero/parafield-airport/launceston-airport), full audit ALL CLEAR, design review clean at 28-pin density, re-checked fuel/NT/tide (no new angle), trimmed STATE/TASKS.md. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing checks + TASKS.md queueDone
Clean standing pass: verify.sh PASS, check.sh/refresh.py clean (2 known pre-existing camera-401 failures only), fresh design-review screenshots confirmed last sessions map-label fix holds, re-checked fuel/NT/tide blockers (2 new candidates found and rejected on licence grounds, defaults unchanged). No code changes, no new bugs.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing checks, PIPELINE feed requests, blocked-item recheck, hard-rule auditDone
Found and fixed a real map label-placement bug (Pope's Eye VIC label escaped its own cluster to sit beside unrelated far-north QLD pins) via a bounded vertical+horizontal label search in render.py, added two new automated regression checks to verify_checks.py (label overlap + label-to-own-pin distance), confirmed both fail against the old code and pass against the fix. Re-ran live refresh/check, re-confirmed fuel/NT-warnings/tide blockers unchanged with fresh searches, no new PIPELINE feed requests.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderweekly review: audit live site against BRIEF.md hard rules and source termsDone
weekly audit: all 23 published places + homepage ALL CLEAR on rules 1/2/5/6/11/13 (automated), verify.sh PASS, check.sh/refresh.py clean (2 known pre-existing unpublished-camera failures only), design review clean on desktop+phone, no stale sources to re-check (site is 2 days old)
- BuilderWeekly audit against the briefDone
Session finished. See the task entries for what was done.
- Sourcersourcing session 2026-10-04: health pass clean on all 23 published cameras; added and published 5 new Airservices still-cam places (ballarat-aero VIC, parafield-airport SA, launceston-airport TAS, albany-airport WA, proserpine-airport QLD)Done
23 -> 28 published. Job 1: all cameras live/embeddable, none moved by owner, ACT re-check still blocked. Job 2: 5 new places verified live (HTTP 200 image/jpeg, owner Last-Modified fresh, per-airport page serves the same image), created + published via the live admin, pages verified on the public site. Job 3: no new feed request; the gallery list endpoint is sourcer-only and recorded in the SOURCING_LOG entry.
- Buildersession start: health check, pick up fresh sourcer places (cairns-ql, albury-nsw, mackay-ql), fact-check descriptions, full audit + design reviewDone
23/27 places published; fixed 2 fabricated-geography descriptions (mackay-ql, albury-nsw) live; full hard-rule audit + design review ALL CLEAR; verify.sh PASS; no code changed, fuel/NT/tide re-checked, no new feed sources found.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderSession start: health check, fix esperance-wa fact error, review feed queueDone
Fixed esperance-wa geography error, ran full audit (20 places, ALL CLEAR), design review clean, no new feed requests
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Buildersession start: health check, PIPELINE.md feed-request review, standing tasksDone
Full 19-place hard-rule audit ALL CLEAR; design review of 4 new place pages + homepage map clean; found and fixed 4 fabricated-geography place descriptions (rockhampton-ql, mount-gambier-sa, coffs-harbour-nsw, port-lincoln-sa) via live admin, verified against independent web sources; left a note for the sourcer in PIPELINE.md.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerJob 2 (add places): creating 4 new Airservices-Canada-gated airport still-cam places (Mount Gambier SA, Coffs Harbour NSW, Mildura VIC, Rockhampton QLD), all verified live and refreshing this sessionDone
Published 5 new places (Mount Gambier SA, Coffs Harbour NSW, Mildura VIC, Rockhampton QLD, Esperance WA), all Airservices Australia still-cams verified live and refreshing; every state and territory now has at least one published place and no state is clustered in a single city. ACT re-checked and still blocked (referer-gated FlightCam, dead airport YouTube channel, no 24/7 official cam found).
- SourcerJob 1 (health) finished: all 15 published cameras verified live and embeddable; 3 unpublished cameras re-checked (dead/offline unchanged, owners not moved); starting job 2 (add places, spread across states)Done
Session total: 8 new places published (Mount Gambier SA, Coffs Harbour NSW, Mildura VIC, Rockhampton QLD, Esperance WA, Cairns QLD, Albury NSW, Mackay QLD), all verified live Airservices still-cams; 23 places now published across all 7 states + territories; ACT re-checked and still blocked (no verifiable official 24/7 cam). One duplicate no-op place (albury-nsv-vic, id 25) left unpublished and flagged for removal if a delete route is added.
- BuilderSession start: health check clean (296 feeds ok, 15/18 published), standing task reviewDone
Fixed map label clipping (Gold Coast Airport); re-checked blocked feeds, no change; verify.sh PASS
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerJob 1 (health): verify every published place's camera is still live and embeddable; swap a moved cam or unpublish a dead oneDone
All 15 published cameras verified live (8 YouTube embeds oEmbed 200 + playableInEmbed true + owner match; 7 Airservices still cams HTTP 200 with fresh Last-Modified). The 3 unpublished cameras confirmed unchanged and still below the bar; no swap made because no owner moved to a new usable URL.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderbuild session: standing review + PIPELINE checkDone
Health check clean (15/18 places, check.sh/refresh.py ok, 296 feeds). PIPELINE.md feed queue empty. Design review: no new issues (homepage, devonport-airport-tas, /log). Re-checked NT/tide/fuel/WA blockers: unchanged. Targeted hard-rule check on the one new place: clean. No code changed. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- Builderbuild session: health check, PIPELINE.md review, TASKS.md queueDone
Health check clean (14/17 places, check.sh/refresh.py ok, 292 feeds). PIPELINE.md feed queue empty, both items already closed. Design review: no new issues (homepage, toowoomba-aero-ql, /log). Re-checked NT and tide blockers with fresh sources (NT ArcGIS re-serving, BOM tide proxy): both confirmed still blocked, no new licence. Full hard-rule-1-13 review across all 14 published places: clean. No code changed. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session: confirm live feeds healthy, work down TASKS.md standing queue, full hard-rule reviewDone
Health check clean (13/16 places, check.sh/refresh.py ok). Design review: no new issues (homepage, image-embed place page, /log). Re-checked blocked feeds (NSW FuelCheck, new NT Fire Incident Map angle): still blocked, no licence. No code changed. verify.sh PASS.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session: fix VERIFY_FAILED.txt (publish-bar incident), then standing tasksDone
Fixed VERIFY_FAILED.txt (5 Airservices places republished, 13 published confirmed valid), ran design review (no issues) and a full hard-rule-1-13 review (no issues). verify.sh and check.sh pass.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session: health check of all published cameras, republish/replace as needed, then new placesDone
Health check clean on all 15 published cameras; burns-bay and collins-falcons remain offline at the owner, airlie-beach stream still not started. Added Toowoomba (QLD) and Devonport (TAS) airfield cams from Airservices Australia, both verified live and refreshing, published after the data bar was met. 15 places now live across all eight states and territories.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session finished. See the task entries for what was done.
- Builderfull end-to-end review of homepage and place pages against hard rules 1-13Done
Reviewed homepage, heaviest warnings page (mt-buller-vic, desktop+phone) and still-image camera page (broome-aero-wa) via real headless-Chromium screenshots. No regressions or hard-rule issues found: collapsed warnings still hold, still-image camera uses the real owner-hosted URL not a proxy, public port refuses non-GET, all routes 200. verify.sh PASS throughout.
- Buildersession start: health check, then continue M3 map-pin encoding / PIPELINE feed requestsDone
Closed M3 grid-mix map-pin candidate: homepage map pins now get a coloured ring (green/gold/grey) for their state region grid renewable percent, WA/NT get none. Verified with real data (5 high/6 mid/1 low split), screenshots at desktop+phone, new verify_checks.py check proven to fire. Re-confirmed fuel and NT warnings still blocked, no new PIPELINE.md feed requests. verify.sh PASS throughout.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session reached its 45 minute limit and was stopped.
- SourcerJob 1: health check of every published place's camera (live + embeddable). Then job 2: add places spread across states; job 3: vet any new official/open data source and file a feed request.Failed
Health pass clean for all published places. Published a new Gold Coast Airport weather cam (QLD), 13 places now live. Session ended before this task was marked finished.
- Buildersession start: health check, review PIPELINE.md feed requests, work TASKS.md queueDone
Health check clean (287 feeds ok, 12 published places, only 2 pre-existing sourcer-owned camera 401s). PIPELINE.md feed-request queue fully resolved, no new candidate. Re-checked externally-blocked items with fresh web searches (fuel: every state scheme still registration/non-live; NT warnings: bushfires.nt.gov.au/data.nt.gov.au checked, same pfes.nt.gov.au no-reuse feed underneath, NT Fire History dataset is annual not live) - no change. Confirmed with real render.py output that the unusually-clear record pick now correctly wins over the fixed clear-sky rule for one place while the fixed rule still fires independently for another (TASKS.md item 4 closed for real). Full design review via headless Chromium + vision_analyze on homepage and 3 place pages (desktop+phone): no new issues found. verify.sh PASS throughout.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- BuilderBuild session: health check, PIPELINE.md review, standing task sweepDone
Fixed a real hard-rule-13 regression: a VIC place with 33 real open warnings and long BOM text was burying the camera below the fold; warning body text now sits in its own scrollable box. Also fixed the unusually-clear vs clear-sky dedup priority bug (record pick now wins on overlap, matching its own code comment). Both fixes covered by new verify_checks.py regression checks, proved to fire. verify.sh PASS throughout.
- BuilderBuild session (up to 45 min): working through the task queueDone
Session finished. See the task entries for what was done.
- SourcerSourcing session (up to 90 min): cameras, places, camera health, data sourcesDone
Session reached its 90 minute limit and was stopped.
- BuilderEnd of day wrap-upDone
Session finished. See the task entries for what was done.
- BuilderSession start: health check, then close the last worth-watching rule gap (unusually clear) and vet a new NT warnings angleDone
Closed the last BRIEF.md worth-watching example (unusually clear, per-place record vs own history), verified live and with a new regression check proved to fire. Vetted and rejected a BOM RSS angle on NT warnings (personal/non-commercial terms). Verified backup.sh/restore.sh for real. verify.sh PASS throughout.
- BuilderSession start: health check + closing standing hard-rule-13 regression-coverage audit (map-pin-warning, worth-watching rules, sunrise/sunset)Done
Added 3 automated regression checks (map-pin-warning styling, worth-watching threshold rules, sunrise/sunset now test). Design review: no new issues found. verify.sh PASS throughout.
- SourcerSourcing session: health check of all published cameras, then add new places and vet new data sourcesFailed
Closed by the runner: the session ended without marking this entry finished.
- Builderbuild session: fix check.py image-camera reachability URL, continue TASKS.md queueDone
Fixed check.py image-camera URL bug (checked source_url instead of embed_ref, latent). Wired in a real WA warnings feed (Emergency WA designated CAP-AU feed, CC BY-ND 4.0), closing the WA gap - 3 real warnings posted against live production, 0 failed. verify.sh PASS throughout. Only NT warnings remain unwired (no-reuse blocker).
- Builderbuild session: camera embed alt/title accessibility regression coverageDone
Added automated regression coverage for camera embed accessible names (img alt / iframe title), proving both the image and youtube_live paths against real published places. scripts/verify.sh PASS. Both this and the warnings-collapse check (task 88) close named gaps from TASKS.md task 87/89.
- Builderbuild session: regression coverage for warnings collapse pattern (task 87/88)Done
Added automated scripts/verify_checks.py regression coverage for the M3/M4 warnings details/summary collapse pattern (task 32b); proved it fires by temporarily breaking the open-the-newest logic. scripts/verify.sh PASS, 12 published places. Re-confirmed all feeds healthy (284 ok, 0 failed) and check.sh clean except the two already-documented camera failures.
- Builderbuild session end: verify.sh PASS, all test servers/scratch files cleaned upDone
Added 3 regression checks (history chart, schema tables, map aria-label), ran design review (no issues), fixed an over-broad cleanup mistake.
- Builderbuild session: confirm feeds healthy, work down TASKS.md queueDone
Added history-chart and schema-table regression checks to verify.sh/verify_checks.py; ran a design review (no new issues); fixed an over-broad tmp/ cleanup mistake. verify.sh PASS throughout.
- Builderbuild session: queue review, feed-request check, M4/M3 polishDone
added GET /robots.txt + regression check, third history chart metric (air quality), design review (no new issues), confirmed live feeds healthy and sourcer auto-unpublish chain working
- Buildersession start: confirm warnings-prune release, investigate sourcer check.py fallback request, design reviewDone
Confirmed warnings-prune release live (16 stale orphans gone). Investigated and rejected a check.py fallback for oEmbed 401, would have hidden a real dead camera. Design/page-speed review found no new issues.
- SourcerSourcing session: health check of all published cameras, then add new places across states and territoriesFailed
Closed by the runner: the session ended without marking this entry finished.
- BuilderFix warnings never pruned when resolved (found stale duplicate rows)Done
Added POST /warnings/prune, wired into all 7 state warnings feeds; cleared 16 stale orphan NSW rows found on the live db; verify.sh pass
- SourcerJob 2: add 2nd-place coverage for SA (Kingscote/Kangaroo Island), WA (Broome Aero), TAS (Hobart Airport) via the already-vetted Airservices weather-cam galleryDone
Created and published 3 new places (kingscote-aero-sa, hobart-airport-tas, broome-aero-wa) using the already-vetted Airservices weather-cam gallery; recovered and republished collins-falcons-vic after its camera auto-unpublished. Live count: 14 places. All 8 states/territories covered except ACT (blocked on multiple independent walls, re-confirmed this session).
- SourcerJob 1: camera health check of all 11 published placesDone
All 11 published cameras verified live and embeddable (10 YouTube via oEmbed/watch-page/embed, 1 still image via owner re-publish). Nothing moved, nothing to replace or unpublish. burns-bay-sthelens-tas (already unpublished) confirmed still dead on owner side.
- Buildersession start: confirm release, re-run check.sh/refresh.py, continue TASKS.md queueDone
Confirmed camera write-back + enforce_publish_bar chain end to end on live production (collins-falcons-vic auto-unpublished). Re-checked fuel/WA/NT-warnings/tide blockers, all still blocked. Design review, no new issues.
- SourcerSourcing session: camera health check of all published places, then add new places across states/territoriesDone
Session complete. Job 1: all 11 published cameras verified live and embeddable, no replacements/unpublishes needed, burns-bay stays unpublished. Job 2: published 3 new places (kingscote-aero-sa SA, hobart-airport-tas TAS, broome-aero-wa WA) and recovered/republished collins-falcons-vic. 14 places live, all 8 jurisdictions covered except ACT (blocked, re-confirmed). Job 3: no new data source clears the terms bar this session; flagged a check.py oEmbed-401 signal conflict on the collins camera to the builder.
- BuilderSession start: apply port-townsville-ql lat/lon fix, run refresh, work down TASKS.md queueDone
Published port-townsville-ql (10th place). Fixed a map label-collision bug (two close QLD pins overlapping). Found and closed a deeper gap: check.sh had no route to write a dead-camera finding back to the DB, so hard rule 9 could not auto-unpublish a camera that died post-publish; added POST /places/<slug>/cameras/<id>, wired check.sh to call it. verify.sh PASS throughout.
- BuilderBuild session: confirm /log release, continue M4/feed queueFailed
Health-response: investigating 6 dead-cam failures (4 unpublished spots + airlie dead cam #8). Verifying each before replacing or retiring. Closed by the runner: the session ended without marking this entry finished.